GUILCOR AR004926, Инструкция по эксплуатации, Страница: 30 / 75

30
3. Display settings _______________________________
Allows to set the parameters of the displaying:

Font size (large, medium, small)

Displaying input description of the measured quantity (yes, no)

Order of the displayed channels (based on the input number,
based on the channel number, selection)
4. Device Settings ________________________________
Access to this submenu can be protected by a PIN1 code. Recording
is stopped after entering into editing mode. If no key has been
pressed for 5 minutes in the editing mode, the device restarts with the
last settings. The following parameters can be edited:

recording parameters (recording interval, start/stop recording)

general settings (LCD backlight activity&intensity, battery type,
menu language)

alarm limits (limit values and alarms directions can be set for
each existing channel and alarm. You can switch from one channel
to another using the arrow keys).

alarm indication - enable or disable of alarm signalization (optical,
audio, Alarm out signal). Setup of MUTE function - temporary
deactivation of audio and/or Alarm out signalization.

memory occupation - limit and signalization (optical, audio, Alarm
out signal)

Ethernet interface - network parameters (device IP address,
gateway IP address, network mask, IP address of the DNS server)
5. Erase Min/Max ________________________________
Erase of the Min/Max memory of either all measured quantities
(“All
channels” option) or selected
measured quantities
(“Individual
channels” option)
by the user. This function can be protected using
PIN2.
The Min/Max values will be erased automatically if the device
happens to be without any power supply, for example, when replacing
its batteries.