GUILCOR AR004926, Инструкция по эксплуатации, Страница: 37 / 75

37
General - Advanced - Device start ___________________
Here you can disable
the “O
ff
key” of the device.
General - Advanced - LCD Display __________________
These settings are used for optimizing the backlight of the display in
relation to your application. As a default, the Multilogger is set in a
way that the backlight (
LCD backlight activity ) is activated only for
several seconds upon the last key pressing. If, however, you need to
ensure a good visibility of the display in the mains powered fixed
installation, turn on the backlight activity only when the external power
supply is on and choose a suitable intensity (
LCD backlight intensity ).
If the backlight is permanently turned on while Multilogger is powered
from the batteries, they discharge relatively fast, therefore do not use
this setting. Turn the backlight off for applications, for which is
required the longest battery life.
General - Advanced - Peripherals ___________________
There you can set the activity interval and baudrate of the external
GPRS modem, which is connected to the RS232 interface of the
Multilogger. In addition, there can be set power management of the
Ethernet interface.
If you set the interval of the turn-on procedure of the GPRS modem,
the Ethernet interface of the Multilogger will be deactivated.
Ethernet in battery mode
The Ethernet interface does not work without external power supply.
However, this interface can send a warning e-mails and records to
the database using
DataLink protocol in the battery mode if you turn
on this feature. These messages will be sent immediately after power
failure or on new alarm. Additionally, they can be sent repeatedly at
the specified interval.
Warning
–
Ethernet interface in battery mode significantly reduces
usable battery capacity. If your LAN is not backed up do not use this
options.