GUILCOR AR004926, Инструкция по эксплуатации, Страница: 29 / 75

29
c) Real time clock circuit state: tick - OK, exclamation mark
- low voltage of the real time clock circuit detected, the
time could be incorrect!
d) Activities of the Alarm out signal: tick - active, field
without a tick - inactive.
e) MUTE activated: tick - was activated (alarm is still active),
field without a tick - was not activated (or the alarm is
inactive).
f) Activities of EN signal: tick - active, field without a tick -
inactive.
g) battery voltage: range from 3.4 V (completely discharged
battery) to 4.5 V (new or just charged battery)
h) device internal temperature (affects the battery charging)
i) cold junction temperature of the thermocouples (only for
models with a thermocouple connector)
j) Multilogger firmware version.
2. Viewing settings _______________________________
Allows to view the following settings:

record settings (recording interval, cyclic record, record on alarm,
record of the average and min/max values per logging interval)

general settings (LCD backlight intensity, battery type, menu
language, date and time in the device)

alarm limits (limit values, hysteresis and delay for each existing
channel and alarm. You can change channels using the arrow
keys).

alarms indication - information about settings of alarm
signalization (optical, audio, Alarm Out) and if it is enabled to
temporarily deactivate the alarm signalization (MUTE function)

memory occupation - information about alarm limit of data
memory occupation and signalization of this alarm (optical, audio,
Alarm out signal)

Ethernet interface - information about LAN parameters (device IP
address, gateway IP address, network mask, IP address of the
DNS server)