GUILCOR AR004926, Инструкция по эксплуатации, Страница: 40 / 75

40
Alarm events - Mute of signalization _________________
The Mute function is used for deactivating alarm signalization by the
user. It can be optionally applied to audio signalization, the ALARM
OUT output or both. It can be performed from the keyboard, from the
web or from the software
Vision . To protect access to these
functions, you can use the PIN2 code, which the operation personnel
must enter. This function deactivates enabled alarm signalizations
until a new alarm occurs. The deactivation can be permanent (until a
new alarm occurs) or temporary (if the alarms remain active even
after selected time out, the signalization is restored).
Alarm events - Memory occupation __________________
If you need to indicate exceeding of your specified limit of the data
memory occupation, use the setup in this section. The signalization
can be selected as optical (red LED diode), audio, or by the means of
the ALARM OUT output activation or sending email to selected
recipients.
Alarm events - System failure ______________________
The options in this section allow for setting up the System alarms
which respond to the Multilogger or probes malfunction. The
signalization can be selected as optical (red LED diode), audio, or by
the means of the ALARM OUT output activation or sending email to
selected recipients.
The Multilogger can respond to the following states:
a) Measurement error on any channel ... for example, a
disconnected or damaged probe
b) Device configuration error ... an unexpected device
configuration error
c) Selftest error ... empty battery
d) External power lost ... failure of the external power supply
source