GUILCOR AR004926, Инструкция по эксплуатации, Страница: 43 / 75

43
Ethernet - Web __________________________________
The Multilogger has its own web pages, where you can monitor
currently measured values and alarm states, and where you can
change some configurations. First of all, you have to allow the
website option (
Web pages On ). If necessary, you can change the
port number ( Web server port ), which is set at 80 by default. If you
want to make configuration changes through the website, you have to
allow this function (
Use web for device configuration ).
Ethernet - SNMP ________________________________
The Multilogger allows for uploading the online measured values and
alarm states using the SNMP protocol. This protocol is always active.
Enter the password for reading (
SNMP Read Community password ).
The MIB tables can be downloaded from the web of the
manufacturer.
Inputs _________________________________________
Here you can specify the quantities that you will measure on every
one inputs, their recording and alarm states. You can see a simple list
of all inputs and measured quantities on the screen.
First of all, specify the probe or signal types connected to each input
(
Settings button). Here you also choose the measured quantities that
you will acquire from this probe or input. You can acquire multiple
quantities at the same time from some probes (
for example,
temperature, relative humidity, dew point, etc. ). However, you can
also decide not to use a specific input, in this case click on Clear
button or remove all set measured quantities. You can name the input
by your own name (
Input name ), which you will then see by all
measured values. Once you are done with this configuration, you can
return back to the list of inputs and measured quantities.
Now, when you have correctly set your inputs and selected measured
quantities, you can configure them in more details using the
Edit
button. For each measured quantity, you can choose if it should be
recorded (
Recording ) and if you wish to use the default setting ( Basic
settings - default ) of the physical unit (6 characters), short description
of the measured quantity (4 characters) and number of decimals.
However, you can also opt for your own setup (
Basic settings -
custom ) and enter the stated items manually. If you need the convert