GUILCOR AR004926, Инструкция по эксплуатации, Страница: 36 / 75

36
General - Preferences ____________________________
Here you can select language localization Language on the device
terminal , Default temperature
unit °C/°F
and, for some models,
Atmospheric pressure unit . If your model does not measure
atmospheric pressure but it is necessary to know it (for calculated
humidity values and CO
2
concentration), you need to specify Ambient
average pressure .
For barometers, you can enter a correction constant for sea level
recalculation as the actual sea level pressure or altitude. Actual sea
level pressure can be obtained from, for example, nearby observatory
or nearby
weather station.
General - Date and Time __________________________
Here you can set the date and time in Multilogger ( Date and Time ). In
the device is running the local time. Use TimeZone , if you can
determine its relation to UTC. This information will be available for all
timestamps from the device (record, online monitoring). The
Multilogger does not allow for automatic changes between the
summer and winter times.
ATTENTION - after change the date and time, the
recorded data in the Multilogger will have to be deleted!
General - Advanced - Energy ______________________
The Multilogger running in the standard mode will measure all inputs
once per second (with the exception of measuring CO
2
concentration,
which will be measured every 2 minutes). The advantage is a fast
response of the device, the disadvantage is its higher current
consumption if the device is powered from batteries only. If you
operate the Multilogger from batteries for a long time and you do not
need a fast response time, you can use the energy saving mode
(
Energy saving mode ), under which the device consumption from the
batteries will significantly decrease, however, the measurement
interval will be extended to 10 seconds (10 minutes for CO
2
concentration). Consumption details can be found in the Technical
Information .