GUILCOR AR004926, Инструкция по эксплуатации, Страница: 61 / 75

61
The following devices can be connected to the input with
the MiniDIN connector:

Digi /M digital probe for measuring temperature and
humidity.
Measured quantities:
Temperature
Relative humidity
Calculated quantities:
Dew point
_______________________________________________________________________
For negative temperatures, the Multilogger
calculates a dew point, no frost point.
Absolute humidity
Specific humidity
Mixing ratio
Specific enthalpy
Measurement range and accuracy:
According to the connected probe.
Recommended cable length:
maximum of 15 meters

Pt1000/M intelligent RTD probe for temperature
measuring
Measured quantity:
temperature from the RTD sensor
Pt1000/ 3850 according to EN 60751
Range:
(-
200 to +600) °C
Accuracy (without probes)
±0.2 °C in the range of (
-
200 to 100) °C
±0.2
% from the measured value in the range
of (100 to 600) °C
Resolution:
better than 0.01 °C *)
Measuring current:
approximately 0.5 mA within an impulse about
60 ms
Recommended cable length:
maximum of 15 meters
______________________________________________________________________________________
*) to achieve this value, the corresponding number of
decimals must be set