Grundig GRN-R5128N, Руководство пользователя

Страница: 116 / 174

12.2.3. Configuring the E-Mail Setup
The system can be configured to send an Email notification to all designated users if an alarm event is detected,
etc., an alarm or motion event is detected or the administrator password is changed.
Before configuring the Email settings, the NVR must be connected to a local area network (LAN) that maintains
an SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send the notification to.
Steps:
1. Enter the Network Settings interface: Menu> Con fi guration> Network
2. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the Network Settings
menu.
3. Click on "Apply" to save the settings.
4. Select the "Email" tab to enter the Email Settings interface.
5. Con fi gure the following Email settings:
a. Enable Server Authentication (optional): Check the checkbox to enable the server authentication feature.
b. User Name: The user name of the sender’s account registered on the SMTP server.
c. Password: The password of the sender’s account registered on the SMTP server.
d. SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
e. SMTP Port: The SMTP port. The default TCP/IP port used for SMTP is 25.
f. Enable SSL/TLS (optional): Click on the checkbox to enable SSL/TLS if required by the SMTP server.
g. Sender: The name of sender.
h. Sender’s Address: The Email address of the sender.
i. Select Receivers: Select the receiver. Up to 3 receivers can be con fi gured.
j. Receiver: The name of the user to be noti fi ed.
k. Receiver’s Address: The Email address of the user to be noti fi ed.
l. Enable Attached Picture: Check the checkbox of "Enable Attached Picture" if you want to send emails with
attached alarm images. The interval is the time of two adjacent alarm images. You can also set the SMTP port
and enable SSL here.
M. Interval: The interval refers to the time between two actions of sending attached pictures.
6. Click on the "Apply" button to save the Email settings.
7. You can click on the "Test" button to test whether your Email settings work.
116 English