Overhead Ceiling Fans
13
®
Fan Components
Verify that all of the following parts and hardware
have been received prior to beginning installation.
Contact your local representative or the manufacturer if
replacement parts are required.
NOTE:
Additional parts (provided by others) may be
required to complete the fan installation, including
additional wiring, steel angle or Unistrut
®
channel, and
hardware for connecting the fan mount to the building
structure.
NOTE:
Hardware quantities listed below indicate what
is required to complete installation. Hardware kits may
include extra fasteners as a convenience.
POWER CABLE
LIGHT POWER CABLE
(OPTIONAL)
FACTORY INSTALLED VFD
FIRE ALARM LANDING POINT
COMMUNICATION CABLE
WITH RJ45 SPLITTER
LIGHT POWER PLUG
(OPTIONAL)
LIGHT COMMUNICATION PLUG
(OPTIONAL)
Downtube and Mount Assembly (1)
Airfoil Blade (3 OR 6)
Winglet (3 OR 6)
AIRFOIL BLADE
SCREW BOSSES
WINGLET
#10 - 12 x 3/4 in. SCREW
(2 PER BLADE)
Rear VFD Cover (1)
DOWNTUBE & MOUNT ASSEMBLY
MOTOR & HUB ASSEMBLY
FRONT VFD COVER
REAR VFD COVER
M4 - 0.7 x 10 MACHINE SCREW
POWER CABLE
(PLUG OPTIONAL)
LIGHT POWER CABLE
(OPTIONAL)
SAFETY CABLE WITH
NO. 4 GRIPPLE
®
FACTORY INSTALLED VFD
FIRE ALARM LANDING POINT
COMMUNICATION CABLE
WITH RJ45 SPLITTER
LIGHT POWER PLUG
(OPTIONAL)
LIGHT COMMUNICATION PLUG
(OPTIONAL)
Shielded CAT-5e
Control Cable (1)
Hub Plate (1)
LOGO PLATE
U-NUT
HUB RETENTION BRACKET
1/4 - 20 x 1 STAINLESS STEEL MACHINE SCREW
DS-3
DS-6
Motor/Hub Assembly (1)
Guy Wire Fastener Kit Bag # 916290
DOWNTUBE & MOUNT ASSEMBLY
UG2 GRIPPLE
®
TURNBUCKLE
GUY WIRE
GUY WIRE
GUY WIRE
GUY WIRE CLAMP ASSEMBLY
GUY WIRE CLAMP BOLT
45º to 60º
TURNBUCKLE
GUY WIRE ATTACHMENT RING
QUICK LINK
CABLE CLAMP
QUICK LINK
U-Bolt Steel Cable
Clamps (10)
Turnbuckle (4)
DOWNTUBE & MOUNT ASSEMBLY
UG2 GRIPPLE
®
TURNBUCKLE
GUY WIRE
GUY WIRE
GUY WIRE
GUY WIRE CLAMP ASSEMBLY
GUY WIRE CLAMP BOLT
45º to 60º
TURNBUCKLE
GUY WIRE ATTACHMENT RING
QUICK LINK
CABLE CLAMP
QUICK LINK
Guy Wire
Clamps (4)
DOWNTUBE & MOUNT ASSEMBLY
UG2 GRIPPLE
®
TURNBUCKLE
GUY WIRE
GUY WIRE
GUY WIRE
GUY WIRE CLAMP ASSEMBLY
GUY WIRE CLAMP BOLT
45º to 60º
UG2 GRIPPLE
®
TURNBUCKLE
GUY WIRE ATTACHMENT RING
QUICK LINK
Quick Link (8)
DOWNTUBE & MOUNT ASSEMBLY
GUY WIRE
GUY WIRE
GUY WIRE CLAMP ASSEMBLY
GUY WIRE CLAMP BOLT
45º to 60º
No. 4 GRIPPLE
®
CONNECTOR
GUY WIRE ATTACHMENT RING
QUICK LINK
TURNBUCKLE
Motor/Hub Fastener Kit Bag # 915065
3/8 in. – 16 x 2-3/4 in. Grade 8, Hex Bolt (2)
M4 – 0.7 x 10 Machine Screw (4)
Airfoil Blade and Hub Plate Fastener Kit
Bag # 915066 OR 854832
5/16 in. Washer (12 OR 24)
5/16 in. – 18 Grade 8, Nylon Locknut (6 OR 12)
5/16 in. – 18 x 2 in. Grade 8, Hex Bolt (6 OR 12)
#10 – 12 x 3/4 in. Screw (6 OR 12)
1/4 in. – 20 x 1 in. Machine Screw (4)
20 Ft.
Guy Wire (4)
DOWNTUBE & MOUNT ASSEMBLY
GUY WIRE
GUY WIRE
GUY WIRE CLAMP ASSEMBLY
GUY WIRE CLAMP BOLT
45º to 60º
No. 4 GRIPPLE
®
CONNECTOR
GUY WIRE ATTACHMENT RING
QUICK LINK
TURNBUCKLE
Quick Start
Guide
Gener
al
Information
Pr
e-Installation
Mechanical
Installation
Fir
e System
Integr
ation
Electrical
Installation
Fan
Netw
orking
Oper
ation And
Maintenance
Troubleshooting
Refer
ence
