®
Overhead Ceiling Fans
®
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety information. Failure
to comply with these instructions will result in voiding of the product warranty and may result in personal injury
and/or property damage.
1
Document 483568
AMPLIFY™ Model DS
Overhead Ceiling Fans
AMPLIFY™ Models DS-3 and DS-6 are the ideal choice for providing year-round comfort in air circulation and
destratification applications. Featuring an aerodynamic, extruded aluminum airfoil design and a high efficiency direct
drive motor, model DS delivers maximum airflow at a fraction of the operating cost of other HVLS fans. And, with its
universal ceiling mount, the DS fan is the easiest HVLS fan to install in the market!
IMPORTANT:
DS fans must be installed with the supplied CAT-5e communication cable or shielded CAT-5e
(by others) that complies with the following specifications. Cable must be twisted pair, shielded 26 ga. CAT-5e
cable with a drain wire and must be compliant with ISO 11801. Cable must use shielded RJ45 connectors with
a soldered drain and wiring configuration must follow EIA/TIA T568B wiring pinout. Individual CAT-5e cable
lengths must not exceed 200 ft. in order to prevent network communication issues.
Required Tools
The following tools will be required to complete the
installation of every DS fan. Additional tools may be
required depending on the application and installation
location of the fan.
• Socket Wrench with 7/16 in., 1/2 in., 9/16 in.,
3/4 in. and 17mm Sockets
• 7/16 in., 1/2 in., 9/16 in. and 3/4 in. Wrenches
• Adjustable Wrench
• Torque Wrench (up to 50 ft∙lbf)
• Torque Wrench (up to 120 in∙lbf)
• Drill and 9/16 in. Drill Bit
• Phillips Screwdriver
• Level
• Impact Driver
• #2 Phillips Bit and Driver
• 3/8 in. Magnetic Nut Driver
• Magnetic Nut Driver Extension
NOTE:
AMPLIFY™ Model DS fan components can
weigh 90 lbs. or greater depending upon the fan size
and accessories that are provided. A suitable means
for lifting the weight of the fan to the mounting point,
such as a scissor lift, should be used for all DS fan
installations.
Quick Start
Guide
Gener
al
Information
Pr
e-Installation
Mechanical
Installation
Fir
e System
Integr
ation
Electrical
Installation
Fan
Netw
orking
Oper
ation And
Maintenance
Troubleshooting
Refer
ence
