Gree CN851W1000, Руководство по обслуживанию

Страница: 39 / 233

34
DC Inverter Multi
VRF Service Manual
CONTROL
2.2.3 Guide for operation- Optional operation
ON/OFF MODE
FAN
CLOCK
BLOW
TURBO SLEEP LIGHT
TIMER OFF TEMP
TIMER ON
1
3 4
2
1. Press SLEEP button, to set sleep.
2. Press TIMER ON and TIMER OFF button, can set the scheduled timer on or timer off.
3. Press LIGHT button, to control the on and off of the displaying part of the unit (This function may be not available
for some units).
4. Press TURBO button, can realize the ON and OFF of TURBOfunction.
2.2.4 Introduction for special function
About blow function
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit About blow functionis
stopped to avoid mould.1. Having set blow function on: After turning off the unit by pressing ON/OFF button indoorfan
will continue running for about 10 min. at low speed. In this period, press blow button to stop indoor fan directly.2.
Having set blow function off: After turning off the unit by pressing ON/OFF button, the complete unit will be off directly.
About AUTO RUN
When AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD, the unit will be in
accordance with the room temp. automatically to select the suitable running method and to make ambient comfortable.
About turbo function
If start this function, the unit will run at super-high fan speed to cool or heat quickly so thatthe ambient temp.
approachs the preset temp. as soon as possible.
About Blow over heat (This function is applicable to partial of models)
When the unit is running in Heat mode or Auto Heat mode, compressor and indoor fan is running,to turn the unit
off, the compressor, outdoor fan will stop running. The upper and lower guide boardrotate to horizontal position, then the
indoor fan will run at low fan speed, 10s later, the unit will turn off.
About lock
Press +and - buttons simultaneously to lock or unlock the keyboard. If the remote controller is locked, the icon
will be displayed on it, in which case, press any button, the mark will flicker for three times. If the keyboard is unlocked,
the mark will disappear.
About swing up and down
1. Press swing up and down button continuously more than 2s,the main unit will swing back and forth from
up to down, and then loosen the button, the unit will stop swinging and present position of guide louver will be kept
immediately.2. Under swing up and down mode, when the status is switched from off to
, if press thisbutton again 2s
later, status will switch to off status directly; if press this button again within 2s,the change of swing status will also
depend on the circulation sequence stated above.
About switch between Fahrenheit and Centigrade
Under status of unit off, press MODE and - buttons simultaneously to switch and .