manualshive.com logo in svg

Gree CN851W1000, Руководство по обслуживанию

Сервисный мануал Gree CN851W1000 доступен для скачивания бесплатно на нашем сайте. Этот мануал поможет вам разобраться с устройством и его обслуживанием. Загрузите его сейчас с {имя сайта} и настройте ваш продукт Gree CN851W1000 на максимальную производительность.

Поделиться
Скачать
background image

32

DC Inverter Multi 
VRF Service Manual

CONTROL

 SLEEP

Press this button, Sleep On and Sleep Off can be selected. After powered on,SleepSLEEP buttonSLEEPOff is 

defaulted. After the unit is turned off, the Sleep function is canceled. AfterSleep function set up, the signal of Sleepwill 
display. In this mode, the time of timercan be adjusted. Under Fan and Auto modes, this function is not available.

 FAN

Press this button, Auto, Low, Middle, Highspeed can be circularly selected. AfterFAN buttonFANpowered on,Auto 

fan speed is default.Under Dehumidify mode, Low fan speedonly can be set up.

AUTO

Low fan

Middle fan

High fan

 CLOCK

Press this button, the clock can be set up, signal 

 blink and display.Within 5 CLOCK buttonCLOCKseconds, the 

value can be adjusted by pr or - button, if continuouslypress this button for 2 seconds above, in every 0.5 seconds, 
the value on ten place of Minute will be increased 1. During blinking,repress the Clock button, signal 

 will be constantly 

displayed and it denotes the setting succeeded. After powered on, 12:00 is defaulted to display and signal 

 will be 

displayed. If there is signal 

 be displayed that denotes the current time value is Clock value, otherwise is Timer value.

 LIGHT

Press this button at unit On or Off status, Light On and Light Off can be set up. LIGHT buttonLIGHTAfter powered 

on, Light On is defaulted.

Notice: This is a general use remote controller, it could be used  for  the air conditioners with multifunction; For 

some  function, which the model dosen't have, if press thecorresponding button on the remote controller that the unit will 
keep the original running status.

 BLOW

Press this button, can turn on or turn offthe drying.In Cool and Dehumidifying mode,this button,"BLOW" will be 

concealed, atthis time the Blow function is turned off.After powered on, Blow OFF is defaulted.When operating the ON/
OFF button, orswitching mode to Cool or Dehumidifyingmode,the Blow function will keep the originalstatus. If unit is 
turned off, Blow OFF onlycan be set up and send the signal. In Auto,Fan as well as Heat mode, Blow functioncan not be 
set up and there is no "BLOW"displaying.press this button and will display "BLOW",at this time the Blow is turned on. If 
repress this button,"BLOW" will be concealed, atthis time the Blow function is turned off.After powered on, Blow OFF is 
defaulted.When operating the ON/OFF button, orswitching mode to Cool or Dehumidifyingmode,the Blow function will 
keep the originalstatus. If unit is turned off, Blow OFF onlycan be set up and send the signal. In Auto,Fan as well as Heat 
mode, Blow functioncan not be set up and there is no "BLOW"displaying.

 –

Presetting temperature can be decreased. Press this button, the temperature can be - button-set up, continuously press 

this button and hold for two seconds, the relative contents can quickly change, until unhold this button and send the order 
that the   (   )signal will be displayed all the time.  The temperature adjustment is unav-ailable under the Auto mode, but 
the ordercan be sent by if pressing this button. 

 +

For presetting temperature increasing. Press this button,can set up the temperature,when unit is on . Continuously 

press and hold this button for more than 2 seconds, the corresponding contents will be changed rapidly, until unpress the 
button then send the information,  (   )is disp- laying all along. In Auto mode, the temp-erature can not be set up, but 
operate thisbutton can send the signal. Centigradesetting range :16-30; Fahrenheit scalesetting range 61-86.  

 TEMP

Press this button, could select displaying the indoor setting temperature or indoor ambient temperature.When the 

indoor unit firstly power on it will display the setting temperature, if the temperature's displaying status is changed from 

other status to"

", displays the ambient temperature, 5s later or within 5s, it receives other remote control signal that will 

return to display the settingtemperature. if the users haven't set up the temperature displaying status,that will display the 
setting temperature. (This function is applicable to partial of models)

After powered on, the setting temperature displaying is defaulted, (according to customers requirements to display,  

if there is no requirement that will default to display  the presetting temperature and there is no icon displayed on wireless 
remote control). Press this button,(When displaying 

 ) , will display presetting temperature; (when displaying 

) will 

display indoor  ambient temperature,TEMP buttonTEMP 

 current displaying status will not be changed. If current 

Содержание CN851W1000










































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CN851W1000

GE 60000 Series Installation And Start-Up Manual preview
60000 Series
Бренд: GE Страницы: 120
Harmonic Electra 9200 Getting Started Manual preview
Electra 9200
Бренд: Harmonic Страницы: 27
B&B Electronics BB-USR604 Quick Start Manual preview
BB-USR604
Бренд: B&B Electronics Страницы: 2
matson MAI1001P User Manual preview
MAI1001P
Бренд: matson Страницы: 11
Autopilot APCG4LP Manual preview
APCG4LP
Бренд: Autopilot Страницы: 13
Fronius 25.0-3-S Operating Instructions Manual preview
25.0-3-S
Бренд: Fronius Страницы: 190
StarTech.com ET91000SM10 Manual preview
ET91000SM10
Бренд: StarTech.com Страницы: 12
tbs electronics powersine 200-12 Owner'S Manual preview
powersine 200-12
Бренд: tbs electronics Страницы: 57
San Telequip SC12 FS SHI User Manual preview
SC12 FS SHI
Бренд: San Telequip Страницы: 4
CyberPower CPS1000AI User Manual preview
CPS1000AI
Бренд: CyberPower Страницы: 2
Samlexpower SDC-23 Owner'S Manual preview
SDC-23
Бренд: Samlexpower Страницы: 3
tams elektronik 43-12367 Manual preview
43-12367
Бренд: tams elektronik Страницы: 28
Synthrotek MST MIDI to CV Manual preview
MST MIDI to CV
Бренд: Synthrotek Страницы: 5
Green Cell 5902719422201 User Manual preview
5902719422201
Бренд: Green Cell Страницы: 44
Crystal Vision Indigo Wallbox Q-Down User Manual preview
Indigo Wallbox Q-Down
Бренд: Crystal Vision Страницы: 68
TV One 1T-DVI-VGA Instruction Manual preview
1T-DVI-VGA
Бренд: TV One Страницы: 12
Infineon CoolSET ICE2QR 65 Series Design Manual preview
CoolSET ICE2QR 65 Series
Бренд: Infineon Страницы: 24
UNICOM FEP-5300TF-C User Manual preview
FEP-5300TF-C
Бренд: UNICOM Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды