manualshive.com logo in svg

Gree CN851W1000, Руководство по обслуживанию

Сервисный мануал Gree CN851W1000 доступен для скачивания бесплатно на нашем сайте. Этот мануал поможет вам разобраться с устройством и его обслуживанием. Загрузите его сейчас с {имя сайта} и настройте ваш продукт Gree CN851W1000 на максимальную производительность.

Поделиться
Скачать
background image

136

DC Inverter Multi 
VRF Service Manual

7�4 Dial-up of Unit

The DC inverter GMV unit of Gree is provided with three dial-ups, i.e. address dial-up, capacity dial-up and function 

dial-up. Adjust the function dial-up to set control, mode and function; Adjust the address dial-up to set the corresponding 
relationship of indoor unit and wired controller; Adjust the capacity dial-up to set capacity demand of indoor unit.

7.4.1 Function Dial-up

 Caution!

 

Functional dial switch S7 is located on the mainboard of the indoor unit. It is operated when the user need to change 

the default setting. 

Functional dial switch S7

Dial-up Switch

Functional Description:

Dial-up Setting

0 (ON Position)

1

1(S / R)

Setting of memory mode

Standby (S)

Restore (R)

2(L / I)

Setting of control mode

Wired control (L)

Remote control (I)

3(M / S)

Setting of master / slave indoor unit

Master indoor unit (M)

Slave indoor unit (S)

4(I / O)

Setting of ambient temperature 

acquisition point

Air inlet (I)

Receiver (O)

5(L / H)

Setting of high / low static pressure fan

Low static pressure (L)

High static(H)

Functional description of function dial-up:

Dial-up switch 1 (S/R): 

Setting of memory mode, including the standby mode and restoration mode. The standby mode refers to that the 

previous parameters will be kept but the unit will not run automatically after the power supply is resumed. This setting 
is factory defaulted (dial-up switch pulled to “ON” position). For example, if the parameters of an indoor unit set before 
power shutdown are High Fan and 24 , the unit will be under standby state after the power supply is resumed and after the 
unit is manually started, the parameters will remain as High Fan and 24 . The restoration mode refers to that not only the 
previous parameters will be kept, but also that the unit can start automatically after the power supply is resumed. But if the 
unit is under STOP state before power shutdown, it will be also under STOP state after the power supply is resumed.

Dial-up switch 2 (L/I): 

Setting of control mode, including wired control and remote control. The wired control mode refers to that the indoor 

unit is controlled from wired controller (hand controller). This setting is factory defaulted (dial-up switch pulled to “ON” 
position). When the setting is wired control mode, the function dial-up on S7 for “setting of memory mode” and “setting of 
master / slave indoor unit” will be disabled. These two settings can be done from the wired controller directly. The remote 
control mode refers to that the indoor unit is controlled from remote controller. When the setting is remote control mode, 
its function dial-up must be set on S7.

Dial-up switch 3 (M/S): 

The setting of master / slave indoor unit refers to the master / slave setting of indoor run mode, mainly used to meet 

the needs of special people on priority (e.g. leader, patients, etc). The factory default setting is that all indoor units are 
master (dial-up switch pulled to “ON” position).

When all the indoor units are set as slave, the outdoor unit will run according to the mode of slave indoor unit that 

is firstly started. If the mode of slave indoor unit started later has in conflict against the mode started earlier, the system 

will display mode conflict error, so that the indoor unit started later cannot work. In this case, the run mode of the unit is 

decided by the slave indoor unit that is firstly started.

When only one indoor unit is set as master, no matter if the master indoor unit is firstly started or not, the slave indoor 

unit will give out mode conflict error as long as its mode is in conflict against the mode of master indoor unit (except that 

the master indoor unit is stopped). In this case, the unit run according to the mode of master indoor unit on priority.

When several indoor units are set as master, the mode of master indoor unit with a lower address code will be taken 

as the master run mode of the unit. when the master indoor unit with the lowest address code is changed from STOP state 
to RUN state, the mode of other master indoor units or slave indoor units shall be kept identical to its mode; otherwise the 

system will give out mode conflict error. Therefore, when there are several master indoor units, the address code of the unit 

shall be set from lower to higher according to priority level.

Содержание CN851W1000










































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CN851W1000

VBrick 9000 Series Quick Start Manual preview
9000 Series
Бренд: VBrick Страницы: 2
VBrick 9000 Series Getting Started Manual preview
9000 Series
Бренд: VBrick Страницы: 80
Xantrex RS2000 Installation Manual preview
RS2000
Бренд: Xantrex Страницы: 76
Karma CVS 908 Instruction Manual preview
CVS 908
Бренд: Karma Страницы: 12
Data Conversion Systems DCS SCARLATTI DAC User Manual preview
DCS SCARLATTI DAC
Бренд: Data Conversion Systems Страницы: 26
Oilon ECO Inverter+ 25 Installation And Commissioning Manual preview
ECO Inverter+ 25
Бренд: Oilon Страницы: 58
Planet VC-201 User Manual preview
VC-201
Бренд: Planet Страницы: 32
ICT SITE INVERTER 300 Instruction Manual preview
SITE INVERTER 300
Бренд: ICT Страницы: 8
Advantech B+B SmartWorx 485USB9F-2W Quick Start Manual preview
B+B SmartWorx 485USB9F-2W
Бренд: Advantech Страницы: 2
DeLOCK 86441 User Manual preview
86441
Бренд: DeLOCK Страницы: 2
StarTech.com ET91000SM10 Manual preview
ET91000SM10
Бренд: StarTech.com Страницы: 12
Solplanet ASW LT Series User Manual preview
ASW LT Series
Бренд: Solplanet Страницы: 75
KEB COMBIVERT F4-S Series Instruction Manual preview
COMBIVERT F4-S Series
Бренд: KEB Страницы: 30
Brunner 0826089N Quick Start Manual preview
0826089N
Бренд: Brunner Страницы: 8
Extron electronics DDS 402 User Manual preview
DDS 402
Бренд: Extron electronics Страницы: 54
Xantrex Trace Series Installation Instructions Manual preview
Trace Series
Бренд: Xantrex Страницы: 21
Vector 225 Watt Power Inverter User'S Manual & Warranty Information preview
225 Watt Power Inverter
Бренд: Vector Страницы: 6
ClickTronic 60834 User Manual preview
60834
Бренд: ClickTronic Страницы: 42

Бренды по названию

Популярные бренды

Загрузить еще бренды