manualshive.com logo in svg

Gree CN851W1000, Руководство по обслуживанию

Сервисный мануал Gree CN851W1000 доступен для скачивания бесплатно на нашем сайте. Этот мануал поможет вам разобраться с устройством и его обслуживанием. Загрузите его сейчас с {имя сайта} и настройте ваш продукт Gree CN851W1000 на максимальную производительность.

Поделиться
Скачать
background image

88

DC Inverter Multi 
VRF Service Manual

INSTALLATION

1 PRECAUTIONS FOR INSTALLATION

1�1 Precautions for Safety

 Before installation, please ensure if the installing site, power ratings, possible operating range (pipe distance, 

height difference between indoor and outdoor unit, power voltage) and installing space are correct and suitable. The 
outdoor unit is general to all models according to its power.

 To ensure correct installation, please make sure to read the Safety Considerations thoroughly before starting the 

installation works

 The considerations stated below are classified into 

 WARNING and 

 CAUTION. Those that might cause 

death or severe injury in case of wrong installation are identified in 

 WARNING. However, those that are stated in 

 

CAUTION may also cause severe accidents sometimes. Therefore, both of them relate to important safety considerations 
and must be strictly followed.

 After completing the installation and test run and confirming that all are normal, please introduce to the client 

on how to use and repair the machine according to the Operating Instructions. Besides, please deliver the considerations 
herein to the clients together with the Operating Instructions, and ask them to keep properly. 

  WARNING!

 The installation shall be performed by the vendor or professional dealer from which you buy the machine. If you 

install by yourself, any improper installation might cause water leakage, electric shock or fire accident.

 The installation shall be done correctly according to installation instructions. Improper installation may cause 

water leakage, electric shock or fire.

 To install a large air-conditioning system in a small room, please make sure to take measures to prevent that the 

refrigerant will not exceed the limit concentration in case of leakage. For the measures to prevent the refrigerant from 
exceeding the limit concentration, please consult your dealer. If no proper measures, it might cause human suffocation in 
case of refrigerant leakage

 Please install at a position that is strong enough to support the weight of machine. If the installing position is of 

low strength, the machine may drop down and thus cause human injury.

 Please carry out installation in accordance with the rules for preventing the typhoon or earthquake. The machine 

may tip over if the installation does not comply with the requirements.

 The electrical cabling shall be carried out by qualified electricians in accordance with the Safety Code for 

Electrical Equipment, relevant local rules and the installation instructions. Make sure to use the special-purpose circuit. If 

the power circuit capacity is low or the construction is improper, it might cause electric shock or fire accidents.

 Please use suitable cables and connect them securely. Please fix the terminal joints securely. The terminal 

connection shall not be affected due to any external force applied onto the cable. Improper connection and fixing may 

cause heating and fire accidents

 Keep the cables in correct shape and prevent them from protruding upward. Please protect them securely with 

repair board. Improper installation may cause heating and fire accidents.

 When erecting or relocating the air conditioner, do not let any air enter into cooling circulation system except the 

specified refrigerant. If any air is mixed, abnormal high pressure will occur in the cooling circulation system, thus causing 

crack or human injury accidents.

 During installation, please always use the attached parts or designated parts. Failure to use the designated parts 

may cause water leakage, electric shock, fire or refrigerant leakage.

  CAUTION

 Please earth securely. Do not connect the earth wires to gas pipe, water pipe, lightning rod or telephone line. 

Improper earthing might cause electric shock.

 Leakage circuit breaker must be installed at some place. No installation of leakage circuit breaker might cause 

electric shock.

 Do not install at a place where inflammable gas might leak. Gas leakage and despot around the machine might 

cause fire accidents.

 To ensure correct drainage of water, the drainage pipe shall be installed according to the installation instructions. 

Also the heat insulation shall be provided to avoid condensing. Improper installation of the pipe might result in water 
leakage and lead to possible wetting of the articles in the room.

Содержание CN851W1000










































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CN851W1000

SAJ H1 Series User Manual preview
H1 Series
Бренд: SAJ Страницы: 68
Parker LCMS-5000 Installation, Operation And Maintenance Manual preview
LCMS-5000
Бренд: Parker Страницы: 36
PBI DCH-4000P User Manual preview
DCH-4000P
Бренд: PBI Страницы: 31
HIKVISION DS-6300DI-T User Manual preview
DS-6300DI-T
Бренд: HIKVISION Страницы: 50
J-Tech Digital JTD-673 User Manual preview
JTD-673
Бренд: J-Tech Digital Страницы: 34
Vortex IR610 Series Manual preview
IR610 Series
Бренд: Vortex Страницы: 179
CMP PowerClean Salt Econ Installation Instructions & Product Manual preview
PowerClean Salt Econ
Бренд: CMP Страницы: 24
LC HML 210 Operating And Installation Manual preview
HML 210
Бренд: LC Страницы: 44
TBB Energier Pro CF2060L User Manual preview
Energier Pro CF2060L
Бренд: TBB Страницы: 60
Altera MAX 10 User Manual preview
MAX 10
Бренд: Altera Страницы: 87
CTC Union 1000MS User Manual preview
1000MS
Бренд: CTC Union Страницы: 44
Hubbell NX Distributed Intelligence NX MEDIA CONVERTER Installation And Operation Instructions For preview
NX Distributed Intelligence NX MEDIA CONVERTER
Бренд: Hubbell Страницы: 3
Photonic Universe 10A dual battery solarcharging kit Instruction Manual preview
10A dual battery solarcharging kit
Бренд: Photonic Universe Страницы: 7
Ramsond Sunray 1500 User Manual preview
Sunray 1500
Бренд: Ramsond Страницы: 21
DCCconcepts Cobalt Alpha Series Manual preview
Cobalt Alpha Series
Бренд: DCCconcepts Страницы: 25
Haivision Pro460 Quick Start Manual preview
Pro460
Бренд: Haivision Страницы: 16
wattsonic 4.0KW-3P Series User Manual preview
4.0KW-3P Series
Бренд: wattsonic Страницы: 87
austriamicrosystems AS5040 Operation Manual preview
AS5040
Бренд: austriamicrosystems Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды