GRASS VALLEY XIP-3901, Руководство пользователя

Страница: 255 / 308

255
XIP - 3901
User Manual
Master
• •
Set to enable a media receiver. This manages the Join/Release of both the
primary and secondary streams.
You must click
Apply or press <Enter> to activate the change you have made
to this setting.
These settings can also be managed by external NMOS control. See
NMOS
Panel , on page 123.
Media
• •
Shows the stream type. The background shows the current media status:
Green: no error
Red: error
Grey:
inactive
RTP Stream
• •
Set to enable each stream receiver individually (primary and secondary).
You must click
Apply or press <Enter> to activate the change you have made
to this setting.
These settings can also be managed by external NMOS control. See
NMOS
Panel , on page 123.
Stream
• •
Shows the primary (ETH1) and secondary (ETH2) stream receiver status:
Green: no error
Red:
error
Grey: inactive
indicates that the same IP stream has been joined multiple times
through the same ETH port.
IGMPv3 Source
• •
Set the source from which to receive multicast streams. With this protocol, the
card deals with a switch to subscribe to one or many streams that are coming
from different sources.
Both iGMPv3 and iGMPv2 protocols are supported. Set this to 0.0.0.0 if iGMP
source is not used. The source range is 0.0.0.0 to 255.255.255.255. The default
value is 0.0.0.0.
These settings can also be managed by external NMOS control. See
NMOS
Panel , on page 123.
indicates that the same IP stream has been joined multiple times
through the same ETH port.
indicates that you must click
Apply
or press <Enter> to activate the
change you have made to this setting.
RX Stream
Address
• •
Set the IP address and UDP port number at which this card receives a specific
stream. IP address 0.0.0.0 disables a receiver. The default UDP port values are:
10000 for all media receivers.
These settings can also be managed by external NMOS control. See
NMOS
Panel , on page 123.
indicates that you must click Apply or press <Enter> to activate the
change you have made to this setting.
RX Stream Port
• •
SDP File
• •
Click to show the last SDP file received through NMOS IS-05 since the last
bootup. This window does not refresh automatically; you need to close and
re-open the window to see an update. If the card has never received an SDP
file since last its last bootup, the window will be empty.
Property ENC DEC Description