GRASS VALLEY KARRERA, Инструкция по установке и обслуживанию

Страница: 148 / 389

Basic Configuration
124
Restoring the Default IP Address
3 Select Network . A Network Configuration screen, displaying the factory default
settings.
• Enter the IP addresses and other information appropriate for your system.
• Panel Name is used to name the panel, for user convenience. This field does not affect
the operation of the unit.
• The Frame IP Address field is for the Video Processor.
4 Select
Apply
. The new IP addresses will be saved and the Remote Aux Panel will reset.
You should label the panel with its IP address and keep a record of all IP addresses for
future reference.
5 Disconnect the PC, and connect the Remote Aux Panel to the switcher system network.
6 Repeat this procedure on all the Remote Aux Panels to be used with your switcher
system, entering a unique IP address for each Remote Aux Panel.
Restoring the Default IP Address
You need to know the current IP address of the Remote Aux Panel in order to change it
using the Web browser. If a panel’s IP address has been changed and its new value not
recorded, it will be impossible to change its IP address. You can restore the panel to its
factory default address, if necessary, with the following procedure.
1 Disconnect the Ethernet cable and the AC power cable from the Remote Aux Panel.
2 Reconnect only the AC power cable. The panel will enter a diagnostic mode.