GRASS VALLEY KARRERA, Инструкция по установке и обслуживанию

Страница: 205 / 389

Installation & Service Manual
181
Relay Assign Menu
Relay Assign Menu
The Relay Assign menu is used to assign the Tally Calculators to Relay Groups, and assign
Engineering/Fixed Sources to relays on the Video Processor Frame GPI/Tally connectors.
Touch the Relay Assign tab to access the menu.
Tally Relay Group
- Delegates the menu controls to configure the selected Tally Group. The
A through J Tally Groups correspond to Tally/GPI connectors 1 through 10 (or 1 through 4)
on the rear of the Video Processor.
Calculation Enables - Assigns the Tally Calculators to the delegated Tally Group. When a
calculator button is off, that calculator’s results will not trigger relays for that Tally Group.
Note:
A calculator must be activated with its
Calc On
button before it can
be assigned to a Tally Group.
Assign Sources to Tally Relays
Sources are assigned to specific relay connectors with the controls on the upper right.
1 Touch the button for the desired Relay in the center of the menu.
2 Choose the Engineering or Fixed Source in the scrolling list on the right. The name of
the source will be displayed on the Relay button.
• The None button clears the current Source assignment for the selected relay.
• The Source Number data pad and scroll dial can be used to quickly select the desired
Engineering Source.
• The Lock button can be used to prevent the source list from scrolling automatically to
that relay’s source. This permits easy selection of adjacent sources.