GRASS VALLEY KARRERA, Инструкция по установке и обслуживанию

Страница: 180 / 389

Basic Configuration
Configure System Input or Output SFPs in Bulk from the Menu
156
3 Select the Bulk Configuration button in the IP I/O Config menu.
4 Enter a range of SFP Inputs or Outputs for Video, Audio, or Ancillary in the Video Bulk
Configuration menu:
a Select the System Start data pad, enter a System Input/Output number in the pop-
up keypad, and select Enter .
b Select the
System End
data pad, enter a System Input/Output number.
5 With the Transmit IP or Receive IP button on, select the Starting Address data pad and
enter the IP Address.
6 Optionally:
a Select the Octet data pad and select the octet to increment when configuring the
IP Addresses, and/or,
b Select the Inc data pad and enter a positive or negative incremental value.
7 With the UDP Port button on, select the Port data pad and enter a port number (1000 is
the default).
8 Optionally, enable the Stream Format button for Audio, select a Stream Format type,
and select Enter .
9 Optionally, enable the Payload Type button, select the Payload ID button (just right of
the Payload Type enable button), enter a value between 96 and 127 and select Enter
(see Setting the RTP Payload Type for configuration information).
About Import/Export Config File (Bulk Configuration)
Accessed by selecting the Import/Export Config File button in the IP I/O Config menu, you
can configure all of the IP I/O Config menu settings within an offline Excel spreadsheet and