Gima 35145, Руководство пользователя

Страница: 154 / 268

18
• Patient information area (as shown in above figure): the patient whose information displayed on Message
indication area is monitored by device currently. Icon “ ” means the patient is female, “ ” is male and
“ ” is unknown. The device presets a default patient information. When the user does not fill any patient
information, the device will use the default patient information. The default patient ID is “00000000”, Name
is “Noname”, patient type is “Adult”. Move the cursor on this information area can shift to “Patient Info.”
setting window.
• Physiological alarm sources (as shown in above figure): displays physiological alarm source information.
• Alarm status: See Chapter 6 Alarms.
• Plugin module info.(optional): when the plugin modules are identified, the corresponding module icons will
appear on the upper right screen, “ ” for CO
2
module, for IBP module, and “ ” for CSM mod-
ule.
Note: if you purchased the Monitor with extended module, then the corresponding module icon(s) will also
appear on the upper right screen.
2.4.2 Statusbar
From left to right of the statusbar, it shows of “Menu”, “Alarm” and “Review” button, technical alarm event;
printer status, network connection status, pulse beep status, power supply status, current time.
Network Power supply
“Menu” button “Alarm” button “Review” button Technical alarm event Printer Beep volume System time
• “Menu” button: enters into system menu dialog.
• “Alarm” button: enters into alarm setting dialog.
• “Review” button: enters into data review dialog.
• Technical alarm event: displays the current detected technical alarm event. Detailed technical alarm infor-
mation see Section Alarm.
• Icons of printer status (optional): there are 3 printer status as below:
1. : it means the printer is ready;
2. : it means the printer error caused by no paper or malfunction;
3. During printing, the printer displays status ( , , ) showing that the printer is working.
Move the cursor on this icon can enter into Printer Settings.
Note: If your monitor is not configured with Printer, then the icons will not be shown up.
• Network connection status: there are 3 status --- “ ” means network connected; “ ” means network
disconnected; “ ” (with a moving point) means network is connecting, if the network connection is lost,
then the device will try to connect to the central station every 2 minutes.
Move the cursor on this icon can enter into Network Settings.
• Pulse beep status: there are 2 status --- “ ” means pulse beep is enabled; “ ” means pulse beep is
disabled.
Move the cursor on this icon can enter into Beep Volume Settings.
• Power supply status
“
” means the battery is being charged;
“ (one grid)/ (two grids)/ / / ” indicates battery voltage;
“ ” means the device is powered by AC power supply.
“ ” means low battery voltage.
• System time: the current time running in the device.
Note:
operating key to move the cursor on statusbar and focus on the icon of printer, network, beep volume,
power supply, system time or on the information area, then the corresponding setting window pops up,
that’s, Printer setting window, Network setting window, Beep volume setting window, power supply setting
window, System time setting window.