Gima 35145, Руководство пользователя

Страница: 221 / 268

85
17.2 Trend Graph
The “Trend Graph” window is as shown in following Figure.
Trend Graph window
Parameter
: select a parameter to review its graph, options are: HR, SpO
2
, RR, S-T, TEMP, CO
2
and so on.
Sampling interval: sample time interval of the trend graph, 7 options: 1 second, 5 seconds, 10 seconds, 30
seconds, 1 minute, 5 minutes and 10 minutes.
Positioning : positioning mark is a data point that the cursor line (a blue vertical line) locates on the trend
graph. And the table on the lower window shows the detailed information (date, time, HR, SpO
2
, and etc.) of
the time point where the Positioning Mark located.
Operation for the Cursor line : move the cursor line to the left and right. The step is 1 pixel initially, but it will
be increased to 8 pixels by rotating of Navigation Knob in one direction more than 30 steps. If the step is 8
pixels, rotating of Navigation Knob in opposite direction will make step to 1 pixel. Press down Navigation Knob
to exit from “Positioning” mode.
Note : on Short Trends view, the general waveform is on the left of waveform area and the short trend view on
the right.
17.3 NIBP List
A NIBP record not only consists of the blood pressure data, i.e. SYS (systolic pressure), DIA(diastolic pres-
sure), MAP( mean arterial pressure), but it also includes data of PR, RR, S-T, SpO
2
, Temp1, Temp2 and etc.,
stored at the measurement time.
“Search” button : search the NIBP records in the specified date.
“Trend graph” check-box
: makes the trend graph of NIBP records visible or invisible as shown in following
Figure.