Gima 35145, Руководство пользователя

Страница: 193 / 268

57
2) Use the ankle wrap to secure the sensor cable on the ankle or leg. Do not over-tighten.
10.5 Understanding the SpO
2
and PR Display
Plethysmogram:
• “
Pleth
”: label for abbreviation of plethysmogram.
SpO
2
Panel:
• “ SpO
2
”: SpO
2
label. “99” is the current SpO
2
value.
• “
PR
”: the label of Pulse Rate. “65” is the current Pulse Rate value.
• “
PI%
”: the label of Perfusion Index, “0.59” is the Perfusion Index.
• “ PR ”: Label of pulse rate.
• “ ”: the high and low alarm limit setting for SpO
2
.
• “ ”: pulse intensity bar graph.
10.6 Changing SpO
2
and PR Settings
Select “Menu”  “SpO
2
” to enter into SpO
2
related setting.
• SE Threshold (%) : set the threshold of oxygen desaturation event (%), the value range is from 1 to 12, step
is 1. The default is 3 (%).
•
Beep Volume
: to set the pulse beep sound volume. Its setting range is “0 ~ 10” level. The default is 5. If you
set the beep volume as “0”, it means the pulse beep sound is off. It’s not recommended to set it as “0”.
• PARM : to enter into SpO
2
alarm setting. See Section “ Understanding the Alarm Setting ”.
The conditions to trigger SpO
2
Event (SE):
Condition 1:
If the value difference between current SpO
2
value and the average value in the latest 1 minute is larger than
the set threshold, and it keeps true for at least 8 seconds, then a SE is generated.
Condition 2:
When the current SpO
2
value is between 90% and 100%, and the value difference between current SpO
2
value and the average value in previous second is larger than the set threshold, then a SE is generated too.
Foot wrap
Ankle wrap
SpO
2
label
High and low alarm limit
for SpO
2
Pulse intensity bar graph
Label of pulse rate
Pulse rate value
SpO
2
value
Label and value of perfusion index