Gima 35145, Руководство пользователя

Страница: 191 / 268

55
which calibration curve is used, if necessary, request the manufacturer for its dedicated calibration curve
and download it into the tester.
10.3 Apply the Sensor
1. Select an appropriate sensor and probe according to the module type and patient category..
2. Apply the sensor to the proper site of the patient.
3. Select an appropriate adapter cable according to the connector type and plug this cable into the SpO
2
connector.
4. Connect the sensor cable to the adapter cable.
10.4 Using Probe and Sensor
When selecting a SpO
2
probe or sensor, do consider the patient’s category, adequacy of perfusion, availability
of probe site and anticipated monitoring duration. Use only SpO
2
probes provided by our company with this
monitor.
We provide several probes for optional, please refer to the following description according to the probe/
sensor you’ve purchased.
Type 1: Adult SpO
2
Finger Clip Sensor
Insert one finger (index finger is preferred, but middle or ring finger with proper nail length is possible as well)
into the probe according to the finger mark on the probe, shown as below.
Type 2: Pediatric SpO
2
Finger Clip Sensor
(A) With the upper and lower jaws open, place a finger evenly on the base of the clip. Push the fingertip against
the stop so that it is over the sensor window.
(B) Spread open the rear tabs of the sensor to provide even force over the length of the pads.
(C) The sensor should be oriented in such a way that the cable is positioned along the top of the hand.
Type 3: Adult/Pediatric SpO
2
Finger Rubber Sensor