Gima 35145, Руководство пользователя

Страница: 170 / 268

34
5.2.5 RESP-oxy view
1) Description:
In this View, the upper 3 waveform channels are default to ECG II, SpO
2
and RESP. The lower area of the
waveform area is Oxycardiorespirogram, which consists of HR trend graph, SpO
2
trend graph and Respiration
waveform or RR trend graph within certain time scale. In “OxyCRG View Settings” window, the time scale and
the 3rd graph can be changed as needed (refers to the following section). Settings of the parameter area are
similar to that in “General View”.
2) OxyCRG Settings:
• Waveform 1 can be set as OFF, ECG I, ECG II, ECG III, ECG aVR, ECG aVL, ECG aVF and ECGV.
• Waveform 2 and 3 can be set as OFF, SpO
2
and RESP (or CO
2
).
• The time scale for OxyCRG can be set as 1min, 2min or 4 min. Min is the time unit of “Minute”
• The 3rd graph in OxyCRG can be set as “RR Trend” or “Resp Wave”.
• Parameter 1 and 2 are nonadjustable, the default is ECG and SpO
2
respectively.
• Parameter 3 ~ 5, or Parameter 7 can be set as OFF, TEMP, NIBP, RESP, CO
2
and CSM etc.
5.2.6 Short trends view
1) Description:
In this view, several waveform channels can be displayed on waveform area. Trend graphs are on the middle
of screen.
The abscissa of trend graph (-2h -0) means various trend of every parameter value from now on to 2 hours
before. The panels of HR, SpO
2
, TEMP, RESP. NIBP and IBP are displayed on parameter area.
2) Short Trends View Settings
• Waveform 1 to 3 can be set as OFF, ECG I, ECG II, ECG III, ECG aVR, ECG aVL, ECG aVF, and ECG V.
• Waveform 4 to 5 can be set as OFF, SpO
2
and RESP (or CO
2
) and so on.
• Trend 1 is nonadjustable, the default is HR.
• Trend 2~5 can be set as OFF, TEMP, SpO
2
, RR and S-T and so on.
• Parameter 1 and 2 are nonadjustable, the default is ECG and SpO
2
respectively.
• Parameter 3~5 can be set as OFF, TEMP, NIBP and RESP (or CO
2
) and so on.
5.2.7 CSM View
1) Description:
In this view, the default waveform in the 4
th
channel is for CSM related. The default in parameter 1, 2 and 5 are
ECG, SpO
2
and CSI respectively. Other waveform traces and parameters area can be set by user, refer to the
“CSM View Setting” for details.
The EEG waveform, SQI/EMG%/CSI/BS% trend graph and event mark can be displayed on CSM waveform
area, the EMG% real-time bar graph will be displayed as well. In above figure, “80” is the amplitude scale for
EEG, “-04.00 -03.00 -02.00 -01.00 -00:00” is the time scale for trend graph, and “0 20 40 60 80 100” is the
scale for CSI value.
2) CSM View Settings
• Waveform 1 can be set as OFF, ECG I, ECG II, ECG III, ECG aVR, ECG aVL, ECG aVF, and ECG V.
• Waveform 2 to 3 can be set as OFF, SpO
2
and RESP (or CO
2
) etc. The default is “SpO
2
” and “RESP” re-
spectively.
• Waveform 4 is nonadjustable, the default is for EEG waveform and SQI/EMG%/CSI/BS% trend graph.
• Parameter 1, 2 and 5 are nonadjustable, the default is ECG, SpO
2
and CSI (Cerebral State Index) respec-
tively.
• Parameter 3 and 4 can be set as OFF, TEMP, NIBP, RESP (CO
2
) etc.
• CSM only: click it to turn on or off the CSM monitoring screen. If you click it to turn on “CSM only” function,
then waveform 1~3, and parameter 1~4 are fixed to be “off” and nonadjustable. Waveform 4 and parameter
5 are fixed for CSM related function.
If you turn on “CSM only” function, then, the CSM view only displays EEG waveform, trend graphs and param-
eters of CSI, EMG%, SQI and BS%, as shown in below figure.