ProfiLux 4 Resource Guide
EN
2018-13-11
89
TIP: Sensor reaction time (Delay)
Some filtration systems have high-flow sumps which can trigger the sensor
when it is not neccessary.
If you wish to change the reaction time for specific level sensors, you can do
so here:
ASSIGNING THE FUNCTION
1.
Click on the (+) icon to the left of
System.
2.
Select SWITCH CHANNELS AND OUTLETS.
3.
Select the outlet that has the ATO pump connected to it.
4.
Set the function to FILL WATER (ATO ONLY) and select the
Control Circuit
number you
used when you created the ATO function.
For example, if you created the function on
Control circuit
1, set the function to
FILL WATER (ATO ONLY) 1. If
Control circuit
2 was used, set the function to FILL
WATER (ATO) ONLY 2.
5.
Type-in a description in both fields, set a black-out delay if necessary, and then click OK.
6.
Click SAVE CHANGES.
