ProfiLux 4 Resource Guide
EN
2018-13-11
38
A.
This is where you can see the approximate amount of ml remaining in your dosing
container. Once a dosing schedule has been created, you will be able to see how many
days you have until the container runs empty.
B.
This is where you specify the capacity of the dosing container. Here you have the option
to specify if an alarm should be triggered when the fluid level drops below the
Minimum
amount. When the container gets refilled, you can click on
Refill container
and enter the
amount of fluid added to the container.
NOTE: For normal dosing purposes, select
Container is emptied.
C.
Dosing pump calibration settings are shown here. The
Flow rate of the pump
field is
where you enter how many ml the pump dispenses in one minute. If you have a Doser
2/2.1 or Doser Maxi, you can click
Calibrate the pump now
to run the calibration for the
selected pump. Any other pump should be manually calibrated before being put to use.
The amount of fluid dispensed should be entered into the respective field. If a Doser
2/2.1 pump speed is changed, the settings must first be saved before calibration can be
started.
D.
If you wish to manually dose, you can do so by clicking and holding down on the doser
head icon. You can also specify the amount of ml to dispense manually by clicking on
Dose now
.
