ProfiLux 4 Resource Guide
EN
2018-13-11
6
PLEASE READ:
ProfiLux 4 connection ports overview
Right out of the box your ProfiLux 4 controller comes packed with many ports for various
purposes ranging from BNC-ports to ports for 1-10v devices. Here is a brief overview of the
ports behind the ProfiLux 4. For more specific information on these ports, please refer to our
ProfiLux 4 Manual; see page 9
Connection Overview
.
BNC Connections: For connecting Temperature, pH, Redox, and Conductivity probes.
Red ports:
For connecting GHL devices such as Gen 1 Dosing pumps, STDL4-4 and
Powerbar6D powerbars. Ports deactivated by default for safety reasons.
Digital light interface: For connecting Mitras Lightbar LEDs.
Green
/
Purple
ports:
For connecting level sensors such as GHL Flow sensors,
float/optical sensors, leak interface for leak sensors, etc.
PAB ports: For connecting PAB devices such as Powerbar5.1, Doser 2.1, etc.
Expansion card slots: Used for adding additional ports to the P4 via expansion cards.
Yellow ports:
For connecting 1-10V compatible devices such as dimmable lighting, flow
pumps, return pumps, etc.
Power failure port: For connecting a backup power source to the P4.
USB port: For connecting to P4 via USB connection.
GHL Control Pad port: For GHL Control Pad device.
DCF receiver port: For radio controlled clock receiver (For German time)
AUX port: For future P4 features and upgrades.
Power port: For connecting primary 12V power source to P4.
