ProfiLux 4 Resource Guide
EN
2018-13-11
29
Illumination – Illumination CH 1 – 32
If you have a dimmable or non-dimmable lighting fixture, you can use the Illumination channels
to create a light schedule for lighting units in general. For example, if you have a non-dimmable
T5 unit, you can use the each illumination channel to specify when the light(s) will turn on/off.
NOTE
The information below will only cover the basics of Illumination channel
options. For more information on Illumination channels, please refer to page
19 of the ProfiLux 4 Programming Guide.
A.
This is where you select if the lighting fixture you’ll use is dimmable or not dimmable
and if this channel will react to elevated temperature readings.
Dimmable: If you’re using a dimmable light, check the box. If not, uncheck the
box.
Temp.-dep. Light reduction: Checking this box will shut down this illumination
channel if tank temperature rises above max allowed value.
B.
Light description goes here.
C.
Here is where you create your light schedule.
New: Click to create a new time-point.
Edit: Click to edit an existing time-point.
Delete: Click to delete an existing time-point.
