Administrator
71
4
4.2.9 Network Failure Detection
The Storage Management setting can be found under this path:
System> Network Failure
Detection
.
The Network Failure Detection is used to detect network connection and notify the user when
connection fails, by ways of alarm outputs, recording live view to memory card, e-mail and/or
FTP messages. By default, this function is disabled.
Figure 4-18
Detection Switch
Select <On> to enable the Network Failure Detection function round-the-clock. To enable the
function according to user-defined schedules, select <By schedule> and select the schedules.
To set up schedules, see
4.2.12 Schedule
.
Detection Type
•
Ping the IP address
Type the IP address of the device to which the camera connects.
•
Minute
Type the time interval at which the camera detects the connection with the specified
device (IP address).