Administrator
65
4
other function modes, the camera will keep executing the specified function; to stop the
performance, simply change the camera’s status.
NOTE:
The dwell time is only adjustable when selecting
Preset
as the alarm
action. When the dwell time is up, the Camera will go back to its trigger
position and recheck alarm pin status.
•
Send HTTP notification
Check this item, select the destination HTTP address, and specify the parameters for
event notifications by <Alarm> triggered. When an alarm is triggered, the notification
can be sent to the specified HTTP server.
For instance, if the custom parameter is set as” action=1&group=2”, and the HTTP
server name is” http://192.168.0.1/admin.php”, the notification will be sent to HTTP
server as” http://192.168.0.1/admin.php? action=1&group=2” when alarm is triggered.
•
Record Stream to SD Card
Select the item and the alarm-triggered recording will be saved into your Micro SD card.
Pre-trigger buffer recording function allows users to check what happened to cause the
trigger. The pre-trigger buffer time range is from 1 to 3 seconds.
Select <Upload for __ sec> to set the recording duration after alarm is triggered. The
setting range is from 1 to 99999 seconds.
Select <Upload during the trigger active> to record the triggered video until the trigger
is off.
NOTE:
Please make sure the local recording (with Micro SD/ SDHC card) is
activated so that this function can be
implemented. Refer to
Recording
for
further details.
File Name
Enter a file name in the File name field, ex. image.jpg. The uploaded image’s file name
format can be set in this section. Please select the one that meets your requirements.