GeoVision GV-SD200 Скачать руководство пользователя страница 33

Страница: 33 / 147

Installing the GV-IP Speed Dome

2.2.3 Wall

Box

Mount

Wall Box Mounting:
Wall Box Mo Standard/Mini Pendent Mount + Mounting Kit

Figure 2-26

Follow the steps.

1. Make a cable entry hole on the wall to recess the cable(s).

2. Fix the Wall Box Mounting on the wall with proper screws and screw anchors. Then run

the cable(s) through the hole on the Wall Box Mounting.

3. Fasten the Standard / Mini Pendent Mount onto the Wall Box Mounting with the supplied

screws and washers. Then thread the cable(s) through the Standard/ Mini Pendent
Mount with the cable(s) coming out of the Pendent Mount’s outlet.

NOTE:

Block the cable entry hole with the supplied sponge to prevent insects from

entering the Pendent Mount. Refer to the illustrations in section

4.4.2 Mini Pendent

Mount > Step 4

4. Attach the Waterproof Rubber to the Standard / Mini Pendent Mount.

5. Thread the cable(s) through the Mounting Kit and join the Mounting Kit to the Standard /

Mini Pendent Mount with the supplied screws and washers. Then adjust the Waterproof
Rubber to the joint.

6. Connect the cable(s) to the Dome Camera.

7. Join the Dome Camera to the Mounting Kit with the supplied screw and washers.

Содержание GV-SD200




















































































































































Результаты поиска

Содержание GV-SD200

Отзывы:

GeoVision GV-SD200, Руководство пользователя, Страница: 33 / 147

Результаты поиска

Содержание GV-SD200

Отзывы: