GeoVision GV-SD200 Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 147

GeoVision GV-SD200 Скачать руководство пользователя страница 78

70

NOTE:

Make sure SMTP or FTP configuration has been completed. Refer to

Mail

and

FTP

for further details.

•

Send HTTP notification

Check this item, select the destination HTTP address, and specify the parameters for
event notifications by <Motion Detection> triggered. When an alarm is triggered, the
notification can be sent to the specified HTTP server.
For instance, if the custom parameter is set as” action=1&group=2”, and the HTTP
server name is” http://192.168.0.1/admin.php”, the notification will be sent to HTTP
server as” http://192.168.0.1/admin.php? action=1&group=2” when alarm is triggered.

•

Record stream to SD Card

Select this item and the Motion Detection recording will be stored in Micro SD/ SDHC
card when motion is detected.

NOTE:

Please make sure the local recording (with Micro SD/ SDHC card) is

activated so that this function can be implemented. Refer to

Recording

for

further details.

File Name

The uploaded image’s filename format can be set in this section. Please select the one that
meets your requirements.

Save

Click on the <Save> button to save all the Motion Detection settings mentioned above.

«
...
76
77
78
79
80
...
»

Содержание GV-SD200




















































































































































Отзывы:

Нет отзывов