DVR Configurations
125
6
4.
You can change the video streaming port number, stream type, codec type and
resolution if needed. The default setting is dual streams.
5. Click
Apply
. The IP camera is added to the connection list.
6.
To set the frame rate of the GV-SD200, right-click the camera to set the options below.
•
Set frame rate (main stream):
Set a frame rate limit for the main stream of GV-
SD200. The main stream is used for recording and watching live view in single view.
•
Set frame rate (sub stream):
Set a frame rate limit for the sub stream of GV-SD200.
The sub stream is used when watching live view in multi-channel screen division with
On-Demand display enabled.
7.
Click the listed camera and select
Display position
to map the IP camera to a channel
on the GV-System.
Figure 6-5
8.
The Statue column should display “Connected”. Click
OK
.