GeoVision GV-SD200 Скачать руководство пользователя страница 36

Страница: 36 / 147

2.4 Pole

Mount

2.4.1 Pole Thin Direct Mount

Pole Direct Mounting:
Pole Thin Direct Mo Standard / Mini Pendent Mount + Mounting Kit

Figure 2-29

Follow the steps.

1. Fasten the Pole Thin Direct Mounting on a pole with equipped stainless straps.

2. Run the cable(s) through the hole on the Pole Thin Direct Mounting.

3. Fasten the Standard / Mini Pendent Mount onto the Pole Thin Direct Mounting with the

supplied screws and washers. Then thread the cable(s) through the Standard / Mini
Pendent Mount with the cable(s) coming out of the Pendent Mount’s outlet.

NOTE:

Block the cable entry hole with the supplied sponge to prevent insects

from entering the Pendent Mount. Refer to the illustrations in section

4.4.2 Mini

Pendent Mount

> Step 4

4. Attach the Waterproof Rubber to the Standard/ Mini Pendent Mount.

5. Thread the cable(s) through the Mounting Kit and join the Mounting Kit to the Standard/

Mini Pendent Mount with the supplied screws and washers. Then adjust the Waterproof
Rubber to the joint.

6. Connect the cable(s) to the Dome Camera.

7. Join the Dome Camera to the Mounting Kit with the supplied screw and washers.

Содержание GV-SD200




















































































































































Результаты поиска

Содержание GV-SD200

Отзывы:

GeoVision GV-SD200, Руководство пользователя, Страница: 36 / 147

Результаты поиска

Содержание GV-SD200

Отзывы: