Administrator
113
4
Flip
Users can track an object continuously when it passes through under the Dome Camera with
setting Flip to Mechanical (M.E.) mode.
NOTE:
Flip setting is manual-controlled only. If a Preset Position or a point for other
function (ex. Sequence) is set in the position that can only be reached through FLIP
motion, when Flip function is turned off, the position cannot be reached anymore.
NOTE:
To
make the Dome Camera tilt between a specific range, such as -10° to
+100° or -10° ~ +190°, please go to the
Tilt Range setting page
to set the tilt angle
range. Otherwise, the Dome Camera will tilt 90° as the default setting.
•
M.E. Mode:
M.E. is a standard mechanical operation. As the Dome Camera tilts to the
maximum angle, it will pan 180°, and then continue tilting to keep tracking objects.
Speed by Zoom
Enable this function to adjust the pan/tilt speed automatically by internal algorithm when
zooming. The larger zoom ratio leads to the lower rotating speed. Click on <Set> button to
save the setting.
ICR Function
With the IR cut filter, the camera can still catch clear image at night time or in low light
conditions.
•
Auto:
In the Auto mode, the internal circuit will automatically decide the occasion to
remove the IR cut filter according to the image brightness level.
•
On:
Select the item to remove the IR cut filter.
•
Off:
Select the item to disable IR function.