98
4.4.3 Auto
Pan
The Auto Pan Programming can be found under this path:
PTZ> Auto Pan
.
The IP Camera supports four Auto Pan Paths. Refer to the instructions below to set an Auto
Pan Path.
Figure 4-38
Auto Pan Setting
To set up an Auto Pan Path, select a path number from the drop-down list first. Then move
the cursor to the live view pane, and move the camera to a desired view as the Start Point of
an Auto Pan Path. Click on the <Set> button of the <Start Point> and the current view will be
automatically saved as the start point of the Auto Pan Path.
NOTE:
The zoom ratio of an Auto Pan’s Start Point will persist throughout the whole
path.
Enter the speed ratio into the Speed field; the speed ratio ranges from 0 (low) to 3 (fast).
Then choose to run the Auto Pan Path in right/left direction from the Direction drop-down list.
Move the camera to another desired position as the end point of the Auto Pan Path. Click on
the <Set> button of the <End Point> for saving the setting.