32
3.1.2 Changing the IP Address
To assign a static IP address or establish a connection to your ISP, log in the Web interface
to access the network setting page.
1. Open your web browser, and type the IP address of the camera or the default IP address
http://192.168.0.10
if your router does not support DHCP. A dialog box appears.
2. Type the default username and password
admin
.
3. Click the
System
tab, select
Network
in the left menu and select
Basic
to access the
network settings.
Figure 3-2
4. To assign a static IP address, select
Use fixed IP address
and type IP Address, Subnet
Mask, Router/Gateway, Primary DNS and Secondary DNS.
5. To establish a connection to your ISP, select
Use PPPoE
and type the username and
password.
6. Click
Apply
.
IMPORTANT:
•
PPPoE
should only be enabled if you know which IP address the camera will get
from the ISP. Otherwise, you must use the Dynamic DNS service to obtain a
domain name linked to the camera’s changing IP address first.
For details on Dynamic DNS Server settings, see
4.2.4 DDNS.
•
If
PPPoE
is enabled and you cannot access the unit, you may have to reset it to the
factory default settings and then perform the network settings again.
To restore the factory settings, see
5.2 Restoring to Factory Default
Settings
.