GeoVision GV-SD200 Скачать руководство пользователя страница 126

Страница: 126 / 147

Chapter 5 Advanced Applications

This chapter introduces more advanced applications.

5.1 Upgrading System Firmware

GeoVision periodically releases the updated firmware on the website. Update your camera to
the latest firmware via its Web interface.

Important Notes before You Start

Before you start updating the firmware, please read these important notes:

1. Stop monitoring of the camera.

2. Stop the connection to GV-System.

3. While the firmware is being updated,

A. the power supply must not be interrupted, and
B. do not unplug the Ethernet cable if the cable is the source of power supply (Power

over Ethernet or PoE supported).

WARNING:

The interruption of power supply during updating causes not only update

failures but also damages to your camera. In this case, please contact your sales
representative and send your device back to GeoVision for repair.

4. Do not turn the power off for 10 minutes after the firmware is updated.

Содержание GV-SD200




















































































































































Результаты поиска

Содержание GV-SD200

Отзывы:

GeoVision GV-SD200, Руководство пользователя, Страница: 126 / 147

Результаты поиска

Содержание GV-SD200

Отзывы: