Installing the GV-IP Speed Dome
15
2
3. Fasten the Hard Ceiling Mount with the three supplied Self-tapping Screws.
4. Thread the connected cables and wires through the center hole of the Mount and
connect the cable to the camera body.
5. Users can choose to hide the cable and wires inside the ceiling, and put the rubber from
the accessory package to fill the gap at the side of the Fixing Plate. Or let the cables out
from the gap on the side of the Fixing Plate (as shown in the diagram).
Figure 2-3
6. Install the Camera on the fixed Hard Ceiling Mount by turning the Camera clockwise.
Figure 2-4
7. Fasten the screw at the side of the Fixing Plate.
Figure 2-5