Genie M1024, Руководство пользователя

Страница: 73 / 135

Genie Monochrome Series-GigE Vision Camera Operational Reference
•
71
OutputSelectorOutput_2 RW Always ENUM Open = 0
Close = 1
Pulse On: End of Exposure = 3
Pulse On: Valid Trigger = 4
Pulse On: Invalid Trigger = 5
Pulse On: Start of Readout = 6
Pulse On: End of Readout = 7
Pulse On: End of Acquisition = 8
Pulse On: Input 1 = 9
Pulse On: Input 2 = 10
PolarityInput_1 RW Always ENUM Active High = 0
Active Low = 1
PolarityInput_2 RW Always ENUM Active High = 0
Active Low = 1
PolarityOutput_1 RW Always ENUM Active Close = 0
Active Open = 1
PolarityOutput_2 RW Always ENUM Active Close = 0
Active Open = 1
PixelFormat RW N.conn ENUM Monochrome,
8-bit = 17301505 (0x1080001)
10-bit = 17825795 (0x1100003)
Power-upConfig RW N.acq ENUM Factory Default = 0
Camera Configuration 1 = 1
TimestampResetSource RW Always ENUM Input 1 = 1
Input 2 = 2
TimestampCounter RW Always ENUM Internal Clock (1µs resolution) = 0
Input 1 = 1
Input 2 = 2
End of Readout = 3
SaveCameraConfigurationSelector RW N.conn ENUM Camera Configuration 1 = 1
LoadCameraConfigurationSelector RW N.conn ENUM Factory Default = 0
Camera Configuration 1 = 1
NetworkConfigurationMode RW N.conn ENUM Automatic = 0
Manual = 1
Feature Type INT32
The feature list for type INT32 has an additional column 'Exponent' which defines the feature's native unit. This
exponent value is used as a unit multiplier so that the feature value is expressed as an integer, not a decimal number.
•
As an example from the following table, the Genie frame rate is 60000 with an exponent of 3. Therefore the
frame rate native unit is mHz. The current value shown – 60000 mHz, is actually 60.000 Hz.
Feature Name Access W-mode Type Exponent Sample Value
DeviceMaxThroughput RO N.valid INT32 EXP10: 0 18432000
SensorWidth RO N.valid INT32 EXP10: 0 640
SensorHeight RO N.valid INT32 EXP10: 0 480
FrameRate (mHz) RW Always INT32 EXP10: 3 60000
BlackLevel RW Always INT32 EXP10: 0 0
Gain RW Always INT32 EXP10: 1 0