manualshive.com logo in svg

Genie M1024, Руководство пользователя

Поделиться
Скачать
Genie M1024 Скачать руководство пользователя страница 110

108  

•

  Technical Specifications 

Genie Monochrome Series-GigE Vision Camera 

Computer Requirements for Genie Cameras 

The following information is a guide to computer and networking equipment required to support the Genie camera 
at maximum performance. The Genie camera series complies with the current IPv4 Internet Protocol, therefore 
current Gigabit Ethernet (GigE) equipment should provide trouble free performance.  

Host PC System 

• 

Pentium 4 system (or AMD equivalent) with 512 MB system memory. 

• 

System motherboard without an embedded graphic card. Avoid using onboard video cards as they may 
compete with other components for shared memory.  

• 

High performance video card as either an AGP bus or PCI Express bus.  

• 

Operating System: Windows 2000 SP1, Windows XP, and Windows Vista are supported.  

Network Adapters 

• 

GigE network adapter (either add on card or on motherboard). The Intel PRO/1000 MT adapter is an 
example of a high performance NIC. Typically a system will need an Ethernet GigE adapter to supplement 
the single NIC on the motherboard.  

• 

PCI Express adapters will outperform PCI adapters.  

• 

Network adapters that support Jumbo Frames will outperform adapters with fixed packet size frames.  

Laptop Information 

• 

Laptop computers with built in 

GigE network adapters

 may still not be able to stream full frame rates 

from Genie. Thorough testing is required with any laptop computer to determine the maximum frame rate 
possible (see 

"

Older Laptop Computer Networking Issues

" on page 122

).   

 

Ethernet Switch Requirements 

When there is more than one device on the same network or a camera-to-PC separation greater than 100 meters, an 
Ethernet switch is required. Since the Genie GigE camera complies with the Internet Protocol, it should work with 
all standard Ethernet switches. However, switches offer a range of functions and performance grades, so care must 
be taken to choose the right switch for a particular application.  

 

Ethernet to Fiber-Optic Interface Requirements 

In cases of camera-to-PC separations of more than 100 meters but an Ethernet switch is not desired, a fiber-optic 
media converter can be used. The FlexPoint GX from Omnitron Systems (

http://www.omnitron-systems.com/

) 

converts GigE to fiber transmission and vice versa. It supports multimode (MM) fiber over distances of up to 220 m 
(720 ft.) and single-mode (SM) fiber up to 65 km (40 mi.) with SC, MT-RJ, or LC connector types. 

Important:

 The inclusion in this manual of GigE to fiber-optic converters does not guarantee they will meet 

specific application requirements or performance. The user must evaluate any supplemental Ethernet equipment.  

 

 

Содержание M1024








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды