Genie M1024, Руководство пользователя

Страница: 125 / 135

Genie Monochrome Series-GigE Vision Camera Troubleshooting
•
123
Problems with Disconnecting NICs
Genie cameras installed in environments with physical motion, vibrations, or high EMI may be disconnected by the
NIC. The following items need to be reviewed to solve the problem.
•
Motion or vibrations may cause data loss because the Ethernet cable connection is not secure. Use a locking
Ethernet cable (see
" Ruggedized RJ45 Ethernet Cables " on page 105 ).
•
High EMI may cause the NIC to drop data or to disconnect and reconnect at a lower data rate. Such situations
do not have simple solutions and may require an expert consultant.
•
Some NIC products may not tolerate any data disruptions. Any condition causing the NIC to drop the
connection may make it unrecoverable. Communication with the Genie can not be reestablished without power
cycling. In this case, trying a variety of NIC products is suggested.
Ethernet Switch Issues
An Ethernet switch usually works transparently and presents no problems. Review the following list when
troubleshooting switch issues.
•
Is the Ethernet switch powered on.
•
Are all ports used configured as active; not disabled.
•
Are all ports running at gigabit speeds–not low speed (i.e. not 10 or 100 Mbps).
•
Is the switch configured to use Jumbo Frames.
•
Verify the Ethernet cabling. Poor cables will cause connections to auto-configure at lower speeds.
•
When using a VLAN Ethernet switch, confirm that the Genie and controlling computer are on the same
VLAN group setup on that switch.
•
When using a chain of switches, ensure that inter-switch connection speeds are the same (1000 Mbps).