Geister ESU-X 500 TT, Руководство пользователя

Страница: 25 / 45

Dateiname mit Revisionsstand: erstellt am: erstellt von: geprüft von: freigegeben von: Seite
ESU-X 500TT_EN B 01.06.15 cgro cg cgro 25 von 45
To change the MONOPOLAR PURE CUT current,
do the following:

Push the PS keys on the panel. On the
area (1) the watts change.
To change the AUTO PURE MICRO current, do
the following:

Push the PS keys on the panel. On the
area (1), the following changes: The
effects (from 1 to 10) and the PWR (max.
power deliverable with the effect).

Change these currents with care! When
changing the effect, the power changes
notably!
Use, in open or laparoscopic surgery, of the monopolar and bipolar currents
(MEMORIES FROM 1 TO 64)
These memories allow the use of the following currents:

All the monopolar and bipolar currents.
The monopolar currents are usable by:

One hand
‐
switched or foot
‐
switched handle / instrument.

One foot ‐ switched handle / instrument and one hand ‐ switched handle.

Two hand
‐
switched handles.
The bipolar currents are always usable by:

One or two foot
‐
switched instruments. Two currents, AUTO MICRO SOFT and AUTO SEALING, are
provided with automatic “impedance sensing” start/stop.
WARNINGS AND PRECAUTIONS FOR THE OPERATION
To perform all operations, carefully apply all the warnings of the paragraph BASIC WARNINGS!
SETTING OF THE CURRENTS

To set, memorize and change the currents. Follow the instructions of the paragraph FIRST SETTING.

To choose the best currents and the starting powers for the specific need. See, in this section, the
paragraph INDICATIONS FOR THE SUITABLE CURRENTS.
CONNECTION AND USE OF THE FOOT
‐
SWITCHES
The unit can be used by 1 or 2 twin foot
‐
switches.

The standard 34-9333 model (On request it is also available the large 34-9332 model for endoscopy)
provided with a foot selector to activate either the monopolar currents or the bipolar currents.

The 34-9331 model, on request, which activates the bipolar currents only. See, in the paragraph USE
OF THE FOOT
‐ SWITCHES, the complete use of the foot ‐ switches.

To connect the 34-9333, use the 1 socket, to connect the 34-9331 use the 2 socket.
Use of the 34-9333 foot
‐
switch.

To deliver the monopolar currents push, for an instant, the foot selector.
The unit signals the selection in three ways:

MONO word by digital speech, MONO 1 image ON for 2 seconds on the touch ‐ screen. (1a
– MONO
light) of the PEDAL
‐
1 socket ON.

To deliver the bipolar currents push, for an instant, the foot selector.
The unit signals the selection in three ways: