GE N60 UR Series, Инструкция по эксплуатации

Страница: 326 / 500

6-20 N60 Network Stability and Synchrophasor Measurement System GE Multilin
6.3 METERING 6 ACTUAL VALUES
6
The above actual values are displayed without the corresponding time stamp as they become available per the recording
rate setting. Also, the recording post-filtering setting is applied to these values.
6.3.13 TRANSDUCER INPUTS/OUTPUTS
PATH: ACTUAL VALUES
ÖØ
METERING
ÖØ
TRANSDUCER I/O DCMA INPUTS
Ö
DCMA INPUT xx
Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES
ÖØ
METERING
ÖØ
TRANSDUCER I/O RTD INPUTS
Ö
RTD INPUT xx
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
MESSAGE
PMU 1 V0:
0.0000 kV, 0.00°
Range: Substituted with zero if delta-connected VTs.
MESSAGE
PMU 1 IA:
0.0000 kA, 0.00°
MESSAGE
PMU 1 IB:
0.0000 kA, 0.00°
MESSAGE
PMU 1 IC:
0.0000 kA, 0.00°
MESSAGE
PMU 1 IG:
0.0000 kA, 0.00°
MESSAGE
PMU 1 I1:
0.0000 kA, 0.00°
MESSAGE
PMU 1 I2:
0.0000 kA, 0.00°
MESSAGE
PMU 1 I0:
0.0000 kA, 0.00°
MESSAGE
PMU 1 FREQUENCY:
0.0000 Hz
MESSAGE
PMU 1 df/dt:
0.0000 Hz/s
MESSAGE
PMU 1 CONFIG CHANGE
COUNTER: 0
Range: 0 to 65535
„
DCMA INPUT xx
„
DCMA INPUT xx
0.000 mA
„
RTD INPUT xx
„
RTD INPUT xx
-50 °C