GE LOGIQ S8, Руководство по обслуживанию

Страница: 107 / 418

GE H
EALTHCARE
PROPRIETARY TO GE
D
IRECTION
5394227, 12 LOGIQ S8/LOGIQ E8 S
ERVICE
M
ANUAL
Section 3-7 - Power On/Off 3 - 29
3-7-9 Disk encryption
Patient data disk encryption
Bitlocker Drive Encryption uses Advanced Encryption Standard (AES) with configurable key lengths of
256 bits.
To enable disk encryption:
1.) Navigate to
Utility
>
Admin
>
Disk Encryption
.
Figure 3-18 Disk Encryption Window (Example of R4.2.5x screen)
2.) Select
Encryption On
.
3.) Select
Yes
to continue.
4.) Create a password to use for each Logon after starting system. This is not the user password, this
is system access for all users.
5.) Recovery key is created, this can be saved to a USB flash drive.
6.) Insert a USB flash drive in the USB port on the operator panel or monitor to save the key.
7.) Select
Save
to store the recovery key to the USB flash drive.
8.) Select
Print key
to send the key to a print destination.
9.) Select
Show key
to write down the key.
10.) Select
Change key
if there is a need to create a new key.
NOTE: DO NOT use the USB media for ANY other storage. This should be used for recovery key
storage ONLY.
11.) Select
Save
and the recovery key will be displayed one more time.
Figure 3-19 Disk Encryption - Recovery Key Window