Chapter A3: Worklist
Definium AMX 700 X-Ray System
5161515-1EN
Rev. 6 (10 February 2008)
A3-12
Operator Manual
© 2008 General Electric Company. All rights reserved.
Select Procedures
Use the following processes to select a patient from the Worklist. This process assumes the patient
already exists on the system. If the patient is not on the Worklist, you must add the patient first. Refer to
(p. A3-15) for more information.
Select a Single Procedure
1. Close or suspend any open exams, if necessary. Refer to
Chapter A4: Image Acquisition-End Exam
(p. A4-13) for more information.
The Worklist screen appears.
2. Select the procedure from the Worklist.
3. Refer to
to conduct the exam.
Select Multiple Procedures
You may select multiple procedures for the same patient to begin image acquisition.
NOTE:
The Patient Name, Patient ID #, and Exam Date must match exactly in order to be selected.
1. Sort the Worklist by Patient Name, if necessary.
2. Press procedure.
3. Press another procedure for the same patient.
4. Continue pressing procedures until all procedures for the patient are selected.
5. Press any other procedure to deselect the procedures.
Delete Procedures
You may remove procedures from the Worklist individually or all completed, discontinued, and locally
added procedures at once.
The [DELETE] button is able to switch between individual delete or delete all.
NOTE:
Deleted procedures cannot be recovered or “undeleted.”
To switch the button between “Delete” and “Delete All”:
1. Press on the small arrow on the right side of the button.
A list appears with the available actions.
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
