Chapter A4: Image Acquisition
Definium AMX 700 X-Ray System
5161515-1EN
Rev. 6 (10 February 2008)
A4-3
Operator Manual
© 2008 General Electric Company. All rights reserved.
exam
If multiple exams were selected from the Worklist, switches
between exams for protocol selection, technique adjustment, and
acquisition.
This drop-down list does not appear if a single exam was selected,
or if the exam was initiated with the Emergency Exam or Cassette
Exam buttons on the Worklist.
protocol list
Lists the available views for the exam and shows which view is
currently active.
[SELECT PROTOCOLS]
Brings up the Select Protocols screen to add, remove, or change
(p. A4-7) for more information.
[SUSPEND]
Ends the exam with the intent of continuing at a later time. Does
not initiate auto send or auto print, if enabled.
Refer to
(p. A4-13) for more information.
[CLOSE]
Closes the procedure. If enabled, [CLOSE] sends billing information
to the PACS system, auto sends, and auto prints acquired images.
Refer to
(p. A4-13) for more information.
[DISCONTINUE]
Ends the exam when the procedure has been opened but the
(p. A4-13) for more information.
Function
Description
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).