GE Definium AMX 700 Скачать руководство пользователя страница 184

Страница: 184 / 240

Chapter A7: Set Preferences

Definium AMX 700 X-Ray System

5161515-1EN

Rev. 6 (10 February 2008)

A7-24

Operator Manual

Table A7-9

Auto Delete functions

Function

Description

Auto Delete
[ON] [OFF]

Turns Auto Delete on or off.

Auto Delete images when

database is __% full.

Specifies when to auto delete images based on database size.

Delete images until

database is __% full.

Specifies how many images to delete based on database size.

Images must be at least

__ Days old before

deletion.

Specifies how old (in days) an image must be for it to be deleted. Images

that are less than the entered number will not be deleted.

Images must meet __ of

the checked options

before deletion.

Allows you to constrain the deletion of raw and processed images

based upon checkbox selection (see below).

Available options are:
• All
• Any
• None

Processed image printed

Selecting the Print parameter allows auto deletion of images that have

been printed.

Processed image sent

Allows auto deletion of processed images with no errors that have been

sent to another viewing station.

Processed image

committed

Allows auto deletion of processed images that have been sent to a long

term device with storage commitment capability.
Storage commitment for a network host is configured from the System

– System screen, Network Connections.

Allow Non-Quality

Checked (tagged) images

to be deleted regardless

of being sent, committed

or printed.

Allows auto deletion of any images that do not have the Auto Tag

(Quality Check) mark.

NOTE:

If any of the images in the series have the Auto Tag (Quality Check)
mark, the series will not auto delete.

[SAVE]

Saves your changes and closes the screen.

[CANCEL]

Closes the screen without saving changes.

FOR

TRAINING

PURPOSES

ONLY!

NOTE:

Once

downloaded,

this

document

UNCONTROLLED,

and

therefore

may

not

the

latest

revision.

Always

confirm

revision

status

against

validated

source

(ie

CDL).

Содержание Definium AMX 700

















































































































































































































































Результаты поиска

Содержание Definium AMX 700

Отзывы:

Похожие инструкции для Definium AMX 700

Бренды по названию

Популярные бренды

GE Definium AMX 700, Руководство оператора

Результаты поиска

Содержание Definium AMX 700

Отзывы:

Похожие инструкции для Definium AMX 700

Бренды по названию

Популярные бренды