GE Definium AMX 700 Скачать руководство пользователя страница 166

Страница: 166 / 240

Chapter A7: Set Preferences

Definium AMX 700 X-Ray System

5161515-1EN

Rev. 6 (10 February 2008)

A7-6

Operator Manual

Remove Network Host

Follow this process to remove a network host.

1. From the Network Connections screen, select the network host.

2. Press [REMOVE].

A message appears: “Are you sure you want to remove (host name)?”

3. Press [YES].

[CANCEL] closes the message and returns you to the Network Connections screen without
removing the connection.

The network host is removed.

Apply “Burn-On-Send” to images

when sending to this network host.

Burns the VOI LUT (Look-Up Tables) into the DICOM header to

be displayed by PACS.
Leaving his option unselected sends all available VOI LUTs to

the DICOM header for PACS to query and apply.

NOTE:

PACS should be configured to read the first VOI LUT for
proper display of images on the Acquisition
workstation.

Send MPPS N-Create and N-Set

notification to this network host.

This node acts as the Destination for receiving the MPPS N-

Create & N-Set Notification. When configured for MPPS, the

System sends information like which exam is in progress,

when a Study is completed, how many images were

acquired, and what was the radiation dose to which the

patient was exposed during that session, etc.

Make this host the HIS/RIS source.

(Only one host can be designated as

the HIS/RIS source.)

Designates the host as the DICOM Worklist provider. Defining

the Radiology Information System (RIS) and Hospital

Information System (HIS) host allows you to download

patient worklists from those networks to your system.

NOTE:

Only one HIS/RIS source may be designated on the
system. Selecting this option will de-select any other
hosts as the HIS/RIS source.

Function

Description

FOR

TRAINING

PURPOSES

ONLY!

NOTE:

Once

downloaded,

this

document

UNCONTROLLED,

and

therefore

may

not

the

latest

revision.

Always

confirm

revision

status

against

validated

source

(ie

CDL).

Содержание Definium AMX 700

















































































































































































































































Результаты поиска

Содержание Definium AMX 700

Отзывы:

Похожие инструкции для Definium AMX 700

Бренды по названию

Популярные бренды

GE Definium AMX 700, Руководство оператора

Результаты поиска

Содержание Definium AMX 700

Отзывы:

Похожие инструкции для Definium AMX 700

Бренды по названию

Популярные бренды