GE CyberDome Series Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 52

GE CyberDome Series Скачать руководство пользователя страница 52

Contacting technical support

For assistance installing, operating, maintaining, and troubleshooting this product, refer to this document and
any other documentation provided. If you still have questions, you may contact technical support during
normal business hours (Monday through Friday, excluding holidays, between 5 a.m. and 5 p.m. Pacific Time).

Note:

Be ready at the equipment before calling for technical support.

Online publication library

Another great resource for assistance with your GE Security products is our online publication library,
available to all of our customers on our website. To access our publication library, go to our website at the
following location:

http://www.gesecurity.com

In the

Tools

area at the top, click the

Publication Library

link. After you register and log on, you may search

through our online library for the documentation you need.

1

Table 1.

Sales and support contact information

Sales

Technical support

Phone:

Toll-free:

888.GESECURity (888.437.3287) in the US, including Alaska and Hawaii; Puerto Rico; Canada.

Outside the toll-free area: 503.885.5700.

E-mail

[email protected]

[email protected]

Fax

800.483.2495

541.752.9096

(available 24 hours a day)

1.

Many GE Security documents are provided as PDFs (portable document format). To read these documents, you will need
Adobe Acrobat Reader, which can be downloaded free from Adobe’s website at

www.adobe.com

.

«
...
50
51
52

Содержание CyberDome Series





















































Отзывы:

Нет отзывов