Page 6 - 5
Applications
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
f) Use a 4 mm allen wrench to loosen the two
screws if the core gripper support requires
adjustment or removal.
Two screws
g) Slide the roll of film onto the unwind shaft and
push the left core end support into the core of
the film roll..
Ensure the roll of laminate is loaded
properly on the unwind shaft.
Exposed adhesive should be facing
away from the heated components.
This will prevent hours of cleaning!
CAUTION
INFORMATION
For 2-1/4 core film, turning the roll film in
the same direction as the gripper tabs while
sliding makes loading the film onto
the unwind shaft easier.
h) Slide the right core end support onto the
unwind shaft.
W A R N I N G
Always use safe and proper lifting practices
when lifting heavy objects. You can become
seriously injured or crushed.
i) With the help of a second person, lift the unwind
shaft with the roll of film and reinsert the unwind
shaft into the open end of the film brake
adjustment slot.
Open end
Film brake adjustment
